Definition of cold-moulded in English:

cold-moulded

adjective

(of an object) moulded from a resin that hardens without being heated.
Example sentencesExamples
- Good cold-molded construction demands high levels of woodworking skill, an area where Goetz excels.
- An additional advantage of cold-molded construction for the amateur is that no single piece of the boat is very large or has much surface area.
- This is not an issue with our cold-molded hulls due to the materials and techniques we use.
- For years cold-molded wood construction has been used successfully in building small sailing dinghies, competitive rowing shells, cruising sailboats, rugged multi-hulls, and swift powerboats.
- Repairs to cold-molded hull planking are carried out by laminating new wood directly in place, having beveled or stepped back the edges of the damaged area.
- This new, cold-molded bottom is called a ‘West System’ bottom, after the name-brand of the epoxy which is used in the installation.
- The book gives very complete coverage of all aspects of both cold-moulded and strip-planked boatbuilding with many useful diagrams of detail areas in finishing the hulls once they are planked up.
- Needless to say, the Philadelphia Ship Preservation Guild was not interested in replacing Gazela's spars with cold-moulded versions, and this idea would lay dormant until it came time to think carefully about the rig for TOAD.
- He was apologetic about entering wooden-boat races because Jusfine, authentic in every other way, was one of the first boats built in the Caribbean of cold-moulded plywood.
- An important benefit of cold-molded plastics is the relatively low tooling cost usually involved for short-run production.

Derivatives

cold-moulding

noun

Also, they are not subject to delamination that is sometimes an issue with 5-layer cold-moulding.
Example sentencesExamples
- This might be achievable with strip or cold-moulding, but not, I believe, with trad construction and decent scantlings.
- Although the technique of cold-molding far predates the epoxy era, it's with the advent of epoxy that laminated hulls, constructed of thin strakes or veneers, have become commonplace.
- As far as the amateur builder is concerned, cold-molding is a relatively straight forward process.
- The following is a brief list of the worlds most respected sportfish companies that use cold-molding techniques.

单词	cold-moulded
释义	Definition of cold-moulded in English: cold-moulded adjective (of an object) moulded from a resin that hardens without being heated. Example sentencesExamples Good cold-molded construction demands high levels of woodworking skill, an area where Goetz excels. An additional advantage of cold-molded construction for the amateur is that no single piece of the boat is very large or has much surface area. This is not an issue with our cold-molded hulls due to the materials and techniques we use. For years cold-molded wood construction has been used successfully in building small sailing dinghies, competitive rowing shells, cruising sailboats, rugged multi-hulls, and swift powerboats. Repairs to cold-molded hull planking are carried out by laminating new wood directly in place, having beveled or stepped back the edges of the damaged area. This new, cold-molded bottom is called a ‘West System’ bottom, after the name-brand of the epoxy which is used in the installation. The book gives very complete coverage of all aspects of both cold-moulded and strip-planked boatbuilding with many useful diagrams of detail areas in finishing the hulls once they are planked up. Needless to say, the Philadelphia Ship Preservation Guild was not interested in replacing Gazela's spars with cold-moulded versions, and this idea would lay dormant until it came time to think carefully about the rig for TOAD. He was apologetic about entering wooden-boat races because Jusfine, authentic in every other way, was one of the first boats built in the Caribbean of cold-moulded plywood. An important benefit of cold-molded plastics is the relatively low tooling cost usually involved for short-run production. Derivatives cold-moulding noun Also, they are not subject to delamination that is sometimes an issue with 5-layer cold-moulding. Example sentencesExamples This might be achievable with strip or cold-moulding, but not, I believe, with trad construction and decent scantlings. Although the technique of cold-molding far predates the epoxy era, it's with the advent of epoxy that laminated hulls, constructed of thin strakes or veneers, have become commonplace. As far as the amateur builder is concerned, cold-molding is a relatively straight forward process. The following is a brief list of the worlds most respected sportfish companies that use cold-molding techniques.
随便看	mend pace mends mendub Mendub mendung mend ways Mendèsism Mendèsist meneer meneghinite menehune Menelaus mene mene tekel mene mene tekel upharsin Menes me-ness menetekel mene tekel Menevian prefers prefervid prefet prefetch prefetching prefetto