| 释义 |
Definition of belt sander in English: belt sandernoun A sander that uses a moving abrasive belt to smooth surfaces. Example sentencesExamples - To sand the floor, you need a drum sander and possibly a belt sander which can be rented at your neighborhood Home Depot or hardware store.
- If the surface isn't smooth use your planer or belt sander.
- The belt sander is designed for quickly sanding rough work on large areas, or wherever heavy-duty sanding is needed.
- I also use a belt sander to shape fins for boards.
- In some cases you will get a better fit if you saw close to but not on your pencil line, and then use a belt sander to sand up to your line.
- Fine trimming can be done with a course-tooth belt sander.
- Indeed, the legs I had been sanding had deep swells where I had let the belt sander linger too long.
- Plane and/or use a belt sander to remove the wood to your line.
- My face felt as though someone had rubbed it with a belt sander.
- After the board dries, take out of the clamps and use a belt sander to smooth the top and bottom surfaces.
- Use a power sander, such as the belt sander shown here, with 80-grit paper.
- Rent a floor sander or belt sander and grind it down.
- At this time, take a belt sander or sanding disc to smooth the perimeter of the stack so that all of the layers are smooth and even.
- Then use a belt sander or block plane to remove the scribe edge up to your line.
- I do not recommend a belt sander or sanding discs attached to a drill.
- The belt sander and fine sand paper can finish the drawer.
- Use a belt sander until you have removed all traces of glue and have a smooth finish.
- You'll need a drum sander, a belt sander or both.
- Do not use a belt sander; it is designed to make things flat and that is the effect it will have on your hull.
- It could also be tidied up using a belt sander to sand down the overlaps and round all the edges.
Definition of belt sander in US English: belt sandernoun A sander that uses a moving abrasive belt to smooth surfaces. Example sentencesExamples - My face felt as though someone had rubbed it with a belt sander.
- You'll need a drum sander, a belt sander or both.
- After the board dries, take out of the clamps and use a belt sander to smooth the top and bottom surfaces.
- Use a belt sander until you have removed all traces of glue and have a smooth finish.
- Rent a floor sander or belt sander and grind it down.
- Plane and/or use a belt sander to remove the wood to your line.
- The belt sander is designed for quickly sanding rough work on large areas, or wherever heavy-duty sanding is needed.
- I do not recommend a belt sander or sanding discs attached to a drill.
- At this time, take a belt sander or sanding disc to smooth the perimeter of the stack so that all of the layers are smooth and even.
- Then use a belt sander or block plane to remove the scribe edge up to your line.
- I also use a belt sander to shape fins for boards.
- It could also be tidied up using a belt sander to sand down the overlaps and round all the edges.
- In some cases you will get a better fit if you saw close to but not on your pencil line, and then use a belt sander to sand up to your line.
- The belt sander and fine sand paper can finish the drawer.
- Fine trimming can be done with a course-tooth belt sander.
- Use a power sander, such as the belt sander shown here, with 80-grit paper.
- Indeed, the legs I had been sanding had deep swells where I had let the belt sander linger too long.
- Do not use a belt sander; it is designed to make things flat and that is the effect it will have on your hull.
- To sand the floor, you need a drum sander and possibly a belt sander which can be rented at your neighborhood Home Depot or hardware store.
- If the surface isn't smooth use your planer or belt sander.
|