释义 |
Definition of lag screw in US English: lag screwnoun A heavy wood screw with a square or hexagonal head. Also called coach screw, lag bolt Example sentencesExamples - The easiest way to do this is to install washers on the lag screws between the ledger and the wall.
- To help keep rain water running down the wall from flowing into the structure through the lag screw holes, squirt some silicone caulk in the holes before screwing in the lag screws.
- The wooden mailbox pictured at right, purchased at a Bay Area nursery, is mounted atop a 6-foot-tall 4-by - 4 redwood post and secured with a 3-inch-long lag screw.
- Tack in place while you drill holes and secure it with lag screws or through-bolts.
- Then drill these holes on the band and joists, again using a drill bit one size smaller than the shank of the lag screw.
- Spurs such as those worn by telephone linemen are forbidden, as are various other bark-damaging climbing aids like spikes or hook-ended lag screws.
verb [with object]lag-screwFasten with a lag screw. Example sentencesExamples - The lag-screwed connection failed at less than 200 pounds when the lags pulled out of the band joist.
- He also designed some brackets that were lag-screwed to the top and bottom of the ridge rafters.
- The materials used in this retrofit were a 2 x 6 bottom plate of all weather wood, lag-screwed into the old 2 x 4 wall floor plate laterally.
- The Ls are lag-screwed through the shingles to the roof's rafters.
- But lag-screwed cleats are MUCH more likely to fail as they rely solely on two screws holding into the wood.
- It is currently lag-screwed into the wall studs, and I get a fair amount of nuisance fan noise inside, so I'd like to use some vibration isolation mounts when I remount it.
- They are supported from beneath with 2’ x 4’ supports, angled back and lag-screwed to the 4’ x 4’ uprights.
- These nuts may be driven out if bolting or lag-screwing from above is necessary.
- Place the stringers by the base of the floor and the upper level, and secure them there permanently by lag-screwing them through the brace into the rim joist.
- They are lag-screwed to the floor and are bolted together.
- The HDs are either thru-bolted through cripple studs in the basement or lag-screwed to 4x4 posts such that the base is about 4’ above the mudsill.
Definition of lag screw in US English: lag screwnoun A heavy wood screw with a square or hexagonal head. Also called coach screw, lag bolt Example sentencesExamples - To help keep rain water running down the wall from flowing into the structure through the lag screw holes, squirt some silicone caulk in the holes before screwing in the lag screws.
- Spurs such as those worn by telephone linemen are forbidden, as are various other bark-damaging climbing aids like spikes or hook-ended lag screws.
- Then drill these holes on the band and joists, again using a drill bit one size smaller than the shank of the lag screw.
- The wooden mailbox pictured at right, purchased at a Bay Area nursery, is mounted atop a 6-foot-tall 4-by - 4 redwood post and secured with a 3-inch-long lag screw.
- The easiest way to do this is to install washers on the lag screws between the ledger and the wall.
- Tack in place while you drill holes and secure it with lag screws or through-bolts.
verb [with object]lag-screwFasten with a lag screw. Example sentencesExamples - Place the stringers by the base of the floor and the upper level, and secure them there permanently by lag-screwing them through the brace into the rim joist.
- The HDs are either thru-bolted through cripple studs in the basement or lag-screwed to 4x4 posts such that the base is about 4’ above the mudsill.
- But lag-screwed cleats are MUCH more likely to fail as they rely solely on two screws holding into the wood.
- The materials used in this retrofit were a 2 x 6 bottom plate of all weather wood, lag-screwed into the old 2 x 4 wall floor plate laterally.
- These nuts may be driven out if bolting or lag-screwing from above is necessary.
- The lag-screwed connection failed at less than 200 pounds when the lags pulled out of the band joist.
- It is currently lag-screwed into the wall studs, and I get a fair amount of nuisance fan noise inside, so I'd like to use some vibration isolation mounts when I remount it.
- The Ls are lag-screwed through the shingles to the roof's rafters.
- They are lag-screwed to the floor and are bolted together.
- He also designed some brackets that were lag-screwed to the top and bottom of the ridge rafters.
- They are supported from beneath with 2’ x 4’ supports, angled back and lag-screwed to the 4’ x 4’ uprights.
|