| 释义 |
Definition of hole saw in English: hole sawnoun A tool for making circular holes, consisting of a metal cylinder with a toothed edge. Example sentencesExamples - Other useful attachments include hole saw blades, spade bits, buffing disks and depth stops, screw driving bits, sanding disks, or even a power grinder.
- To create a clean, splinter-free hole, always drill from both sides of the door with your hole saw.
- My old man also has a 27 mm metal hole saw someplace, which will prove much easier for cutting holes than using a jigsaw.
- Drill a starter hole using a hole saw.
- Remove the hole saw and start drilling again from the other side of the door.
- The lock manufacturer will specify the size of the hole saw.
- Cut the appropriate size holes in the panel as traced in Step 2 using a hole saw bit in an electric drill.
- To drill counter-mounted faucet holes, use an electric drill and an appropriately sized hole saw or spade bit.
- Drilling can be done with many of the same tools you use for drilling wood or metal, including twist drills, brad point drill bits, spade bits or a hole saw with a pilot bit.
- Use a hole saw and electric hand drill to make the holes in the center of the wheels for the axle to run through.
- To make the holes, he uses a drill with a hole saw bit (an attachment for cutting a door to install the doorknob).
Definition of hole saw in US English: hole sawnoun A tool for making circular holes, consisting of a metal cylinder with a toothed edge. Example sentencesExamples - My old man also has a 27 mm metal hole saw someplace, which will prove much easier for cutting holes than using a jigsaw.
- Drilling can be done with many of the same tools you use for drilling wood or metal, including twist drills, brad point drill bits, spade bits or a hole saw with a pilot bit.
- The lock manufacturer will specify the size of the hole saw.
- Cut the appropriate size holes in the panel as traced in Step 2 using a hole saw bit in an electric drill.
- Use a hole saw and electric hand drill to make the holes in the center of the wheels for the axle to run through.
- To make the holes, he uses a drill with a hole saw bit (an attachment for cutting a door to install the doorknob).
- To drill counter-mounted faucet holes, use an electric drill and an appropriately sized hole saw or spade bit.
- Other useful attachments include hole saw blades, spade bits, buffing disks and depth stops, screw driving bits, sanding disks, or even a power grinder.
- To create a clean, splinter-free hole, always drill from both sides of the door with your hole saw.
- Remove the hole saw and start drilling again from the other side of the door.
- Drill a starter hole using a hole saw.
|