| 释义 |
Definition of cover glass in English: cover glassnoun another term for coverslip Example sentencesExamples - Before the experiment, beads were added to the monolayer grown on the cover glass and allowed to bind to the cell surfaces.
- Antigen-retrieval solutions were then added and cover glasses were put in place, avoiding air bubble formation.
- We observed that in glycerol the heating effect increased when the bead was trapped further away from the cover glass.
- At the start of an experiment, fluorescently labeled cells suspended in serum-free media were added to the cover glass.
- ECM-coated cover glass was placed on a motorized sample holder so that the cover glass was suspended above the prism.
- I can see him clamp it between two cover glasses, place it in the microscope and show me how it was made.
- A cover glass was gently placed at 4°C for 5 min to allow gel solidification.
- Chromosomes were stained with aceto-orcein under a cover glass with brief heating over an alcohol lamp.
- This dry film was carefully separated and placed in a micro slide covered with a cover glass.
- The slides were sealed with a cover glass by means of a xylene-free mountant.
- We held the cover glass in place with small spots of vacuum grease and then added 3 mL external buffer.
- The cover glass was removed after freezing, and the spread was dehydrated in an ethanol series and air dried.
- Myofibrils were isolated by using fine needles to disaggregate specimens on a cover glass in a drop of rigor solution.
- The measuring chamber consists of a copper block serving as a holder for the cover glass with the adherent cells.
- Roots were arranged in a zig-zag pattern on the microscope slides and were covered by a large cover glass.
Definition of cover glass in US English: cover glassnoun another term for coverslip Example sentencesExamples - Antigen-retrieval solutions were then added and cover glasses were put in place, avoiding air bubble formation.
- A cover glass was gently placed at 4°C for 5 min to allow gel solidification.
- The measuring chamber consists of a copper block serving as a holder for the cover glass with the adherent cells.
- We held the cover glass in place with small spots of vacuum grease and then added 3 mL external buffer.
- Roots were arranged in a zig-zag pattern on the microscope slides and were covered by a large cover glass.
- At the start of an experiment, fluorescently labeled cells suspended in serum-free media were added to the cover glass.
- The slides were sealed with a cover glass by means of a xylene-free mountant.
- We observed that in glycerol the heating effect increased when the bead was trapped further away from the cover glass.
- ECM-coated cover glass was placed on a motorized sample holder so that the cover glass was suspended above the prism.
- This dry film was carefully separated and placed in a micro slide covered with a cover glass.
- Chromosomes were stained with aceto-orcein under a cover glass with brief heating over an alcohol lamp.
- Before the experiment, beads were added to the monolayer grown on the cover glass and allowed to bind to the cell surfaces.
- Myofibrils were isolated by using fine needles to disaggregate specimens on a cover glass in a drop of rigor solution.
- The cover glass was removed after freezing, and the spread was dehydrated in an ethanol series and air dried.
- I can see him clamp it between two cover glasses, place it in the microscope and show me how it was made.
|