tabulator

tab·u·la·tor

T0006200 (tăb′yə-lā′tər)n.1. One that tabulates.2. A machine that reads, sorts, and prints out information from punched cards.3. A mechanism on a typewriter for setting automatic stops or margins for columns.4. Computers A device for reading data from punched cards and producing printed lists or totals of the result.

tabulator

(ˈtæbjʊˌleɪtə) n1. (Printing, Lithography & Bookbinding) a device for setting the automatic stops that locate the column margins on a typewriter2. (Computer Science) computing a machine that reads data from one medium, such as punched cards, producing lists, tabulations, or totals, usually on a continuous sheet of paper3. (Communications & Information) any machine that tabulates data

tab•u•la•tor

(ˈtæb yəˌleɪ tər)

n. 1. a person or thing that tabulates. 2. tab ¹ (def. 6). [1880–85]

Thesaurus

Noun

tabulator - a calculator that keeps a record of the number of times something happenscountercalculating machine, calculator - a small machine that is used for mathematical calculationspulse counter - an electronic counter that counts the number of electric pulses

Translations

tabulatore

tabulator

Computing a machine that reads data from one medium, such as punched cards, producing lists, tabulations, or totals, usually on a continuous sheet of paper

Tabulator

an electromechanical digital calculating machine that automatically processes numerical and alphabetic information stored on punch cards and records the results of the computations on continuous paper or special forms. A tabulator is a basic component of a punch-card processing system. Depending on the way in which the information is represented, a distinction is made between numerical and alphanumeric tabulators.

Tabulators can operate in different ways. For example, the tabulator may produce a line-by-line printout of the numerical and alphabetic information read from each card. At the same time, sums or differences are accumulated in accumulators, or counters. After the listing of a group of cards, the tabulator prints the totals for that group.

In another mode of operation, the tabulator prints alphabetic and numerical information characterizing the information being processed, sums in the accumulators the intermediate numerical quantities (without recording them), and finally prints the totals for the given group of cards.

In a third mode of operation, the tabulator makes use of intermediate cycles. It carries out the addition or subtraction of totals stored in the accumulators, compares such totals, and performs multiplication or division of numbers. These processes are carried out over several intermediate cycles.

The capabilities of a tabulator can be substantially expanded by connecting it to auxiliary units. When the tabulator is used with a summary punch, a graphic character-sensitive punch, or a reproducer, summary punch cards can be produced in addition to a printout. When an electronic computer unit is used in conjunction with the tabulator, the tabulator can not only add and subtract numbers but also multiply and divide them in a single machine cycle.

The components of a tabulator include the following: a control unit, a punch-card reader, an arithmetic unit, a storage unit, and a unit for the output of information through printing or through the punching of cards. In accordance with the prescribed program, the control unit coordinates the operation of the other units; it automatically monitors the descriptive information on the cards and automatically transfers the results obtained in the accumulators. The machine can be switched into different modes of operation from the control console. The input unit is a mechanism that feeds punch cards into a brush station with two (upper and lower) sets of brushes that permit the information to be read from the punch cards and transmitted to the arithmetic unit, control unit, or output unit. The arithmetic and storage units are accumulators that carry out the addition and subtraction of numbers and permit a total from one accumulator to be added to or subtracted from a total in another accumulator. The output information is printed by numerical or alphanumeric printers or is punched in cards by a summary punch.

Tabulators are used in data-processing systems to handle large amounts of information where the performance of logical operations is not required.

REFERENCES

Fedorov, M. P., and V. I. Isakov. Tabuliatory T-5 i T-5M. Moscow, 1958.
Vinokurov, P. S. Metodika proverki i naladki raboty schetno-perforatsionnykh mashin. Moscow, 1968.
Surin, N. M., and I. B. Shnaiderman. Tabuliator TA80–1. Moscow, 1973.

G. S. RUMIANTSEVA

tabulator

[′tab·yə‚lād·ər] (computer science) A machine that reads information from punched cards and produces lists, tables, and totals on separate forms or continuous paper.

tabulator

A machine that added up numerical data in punch cards. Tabulators were used to prepare invoices, checks and "green-striped" reports as late as the 1970s. Invented by Herman Hollerith in 1890, his tabulator displayed the totals on dials. Subsequent models were able to perform additional arithmetic operations as well as print the results. See Hollerith machine, punch card and continuous forms.

First Tabulator - 1890 U.S. Census

After placing the punch card in the reader and pulling the handle down, the dials incremented, and the card was dropped into the sorting box that opened. (Image courtesy of The Computer History Museum, www.computerhistory.org)

A Tabulator in the 1960s

Tabulating machines such as the IBM 407 (left) were used to print millions of reports, invoices and checks. Hollerith's company evolved into IBM, and IBM was always the leading tabulating equipment vendor (see Hollerith machine). (Image courtesy of IBM.)

tabulator

tab·u·la·tor

tabulator

tab•u•la•tor

tabulator

tabulator

Tabulator

REFERENCES

tabulator

tabulator

tabulator

Synonyms for tabulator

noun a calculator that keeps a record of the number of times something happens

Synonyms

Related Words