Gold was sputtered to a thickness of 8 nm using a low-vacuum sputter coater.
Agnieszka Kurek and Sean T Barry 2011, 'Metal-assisted chemical etching using sputtered gold: a simple route to black silicon',Science and Technology of Advanced Materialshttp://iopscience.iop.org/1468-6996/12/4/045001. Retrieved from DOAJ CC BY 4.0 (https://creativecommons.org/licenses/by-sa/4.0/legalcode)
Multiple layers were deposited by a spin coater to increase the film thickness.
M.N.H. Mia, M.F. Pervez, M. Khalid Hossain, M. Reefaz Rahman, M. Jalal Uddin, M.A.Al Mashud, H.K. Ghosh, Mahbubul Hoq 2017, 'Influence of Mg content on tailoring optical bandgap of Mg-doped ZnO thin film preparedby sol-gel method', Results in Physicshttp://www.sciencedirect.com/science/article/pii/S2211379717306022. Retrieved from DOAJ CC BY 4.0 (https://creativecommons.org/licenses/by-sa/4.0/legalcode)
The theophylline tablets were coated with the nanoemulsion using a fluid bed coater.
Nicolas Anton, Astrid de Crevoisier, Sabrina Schmitt, Thierry Vandamme 2012, 'A New Application of Lipid Nanoemulsions as Coating Agent, Providing Zero-Order HydrophilicDrug Release from Tablets', Journal of Drug Deliveryhttp://dx.doi.org/10.1155/2012/271319. Retrieved from DOAJ CC BY 4.0 (https://creativecommons.org/licenses/by-sa/4.0/legalcode)
A thin-film multi-junction thermocouple array was sputter deposited using a magnetron sputter coater.
Erdogan Guk, Manoj Ranaweera, Vijay Venkatesan, Jung-Sik Kim 2016, 'Performance and Durability of Thin Film Thermocouple Array on a Porous Electrode',Sensorshttp://www.mdpi.com/1424-8220/16/9/1329. Retrieved from DOAJ CC BY 4.0 (https://creativecommons.org/licenses/by-sa/4.0/legalcode)
Thin films were obtained by means of a spin coater, applying the synthetized mixture on a glass substrate.
Almedina Modrić-Šahbazović, Izet Gazdić, Suada Sulejmanović 2016, 'Properties of the Surface Layer of Thin Films of Polyaniline Doped With PhosphoricAcid', TEM Journalhttp://www.temjournal.com/content/53/TemJournalAugust2016_284_288.pdf. Retrieved from DOAJ CC BY 4.0 (https://creativecommons.org/licenses/by-sa/4.0/legalcode)
Using an automated spray coater, the film thickness and roughness were optimized by controlling the solution concentration and substrate temperature.
Mehran Habibi, Amin Rahimzadeh, Inas Bennouna, Morteza Eslamian 2017, 'Defect-Free Large-Area (25 cm2) Light Absorbing Perovskite Thin Films Made by SprayCoating', Coatingshttp://www.mdpi.com/2079-6412/7/3/42. Retrieved from DOAJ CC BY 4.0 (https://creativecommons.org/licenses/by-sa/4.0/legalcode)