steel containing between 0.04 and 0.25 per cent carbon
Examples of 'low-carbon steel' in a sentence
low-carbon steel
Low carbon steel electrodes were used in the experiments.
Marijana Kraljić Roković, Mario Čubrić, Ozren Wittine 2014, 'Phenolic compounds removal from mimosa tannin model water and olive mill wastewaterby energy-efficient electrocoagulation process', Journal of Electrochemical Science and Engineeringhttp://www.pub.iapchem.org/ojs/index.php/JESE/article/view/133. Retrieved from DOAJ CC BY 4.0 (https://creativecommons.org/licenses/by-sa/4.0/legalcode)
The coatings were applied on low carbon steel plates.
Mohammadreza Shishesaz, Davood Jafari, davood zaarei, Iman Danaee 2017, 'Nanocomposite Coating Based on Thermoplastic Acrylic Resin and Montmorillonite Clay:Preparation and Corrosion Prevention Properties', Iranian Journal of Oil & Gas Science and Technologyhttp://ijogst.put.ac.ir/article_44382_f8abc5507e74558797357524264d3e96.pdf. Retrieved from DOAJ CC BY 4.0 (https://creativecommons.org/licenses/by-sa/4.0/legalcode)
Boron in low carbon steel can improve hardenability and hot ductility remarkably.
Hangyu Zhu, Jian Sun, Wei Wang, Weisheng Wang, Jialiu Lei, Zhengliang Xue 2019, 'Experimental investigation on segregation and remelting behaviors of boron-containingsteel with low carbon', Results in Physicshttp://www.sciencedirect.com/science/article/pii/S2211379718327414. Retrieved from DOAJ CC BY 4.0 (https://creativecommons.org/licenses/by-sa/4.0/legalcode)
The microstructure of hot-stamped low-carbon steel sheet comprises lath martensite and retained austenite.
Tabata Shin-ichiro, Hikida Kazuo, Kojima Nobusato, Mizui Naomitsu 2015, 'Effect of Microstructures on Yield Strength in Hot-Stamped Steel Sheet', MATEC Web of Conferenceshttp://dx.doi.org/10.1051/matecconf/20153307002. Retrieved from DOAJ CC BY 4.0 (https://creativecommons.org/licenses/by-sa/4.0/legalcode)
This powder was sprayed by a flame spray technique onto low carbon steel substrates.
Jiansirisomboon, S., Wirojanupatump, S., Sopadang, A., Yudee, A. 2006, 'Aluminium-12wt% silicon coating prepared by thermal spraying technique: Part 1 optimizationof spray condition based on a design of experiment', Songklanakarin Journal of Science and Technology (SJST)http://www.sjst.psu.ac.th/journal/28_2_pdf/19_Aluminium1.pdf. Retrieved from DOAJ CC BY 4.0 (https://creativecommons.org/licenses/by-sa/4.0/legalcode)
Low carbon steel weld structures generally exhibit a very linear stress-strain relationship.
Hadryś D., Węgrzyn T., Piwnik J., Wszołek Ł., Węgrzyn D. 2016, 'Compressive Strength of Steel Frames after Welding with Micro-Jet Cooling', Archives of Metallurgy and Materialshttp://www.degruyter.com/view/j/amm.2016.61.issue-1/amm-2016-0023/amm-2016-0023.xml?format=INT. Retrieved from DOAJ CC BY 4.0 (https://creativecommons.org/licenses/by-sa/4.0/legalcode)
This research work investigated the corrosion resistance of nickel plated low carbon steel in tomato fluid.
Oluleke OLUWOLE, Oluwadamilola OLAWALE 2010, 'Corrosion Behaviour of Nickel Plated Low Carbon Steel in Tomato Fluid', Leonardo Electronic Journal of Practices and Technologieshttp://lejpt.academicdirect.org/A17/033_042.pdf. Retrieved from DOAJ CC BY 4.0 (https://creativecommons.org/licenses/by-sa/4.0/legalcode)