It includes two separate removable 10mm high-density foam inserts.

To minimize further damage—say, by shoving in ill-fitting foam inserts—curators need to know every nook and cranny.

Among the changes we advised were special foam inserts to surround the head and neck, and since their introduction there has not been a serious head injury.

Some soft pads contain stiff foam inserts of the dense or hard varieties to provide more stability and durability.

Later, a 20-inch crack in the foam insulation of the fuel tank was discovered.

Foam insulation material from the space shuttle's external fuel tank has been adapted to make lighter, stronger moulds for artifi cial limbs.

That system was made up of commonly used materials - rigid foam insulation board, separated by an air vent from rainscreen aluminium cladding.

The 1970s hexagonal-tile cladding on the upper exterior was replaced with cedar planks covering extra foam insulation.

Foam insulation that had broken off from the external fuel tank during the launch 16 days earlier was later found to have hit and cracked a panel on the wing.

Once the basic design has been approved, the clay sculpting starts, before the moulds are made and the final pieces cast in silicone or foam latex.

The puppets are made from composite materials like latex, rubber, foam latex etc.

Facial prosthetics can be made from a wide range of materials - including latex, foam latex, silicone, and cold foam.

Regular latex instead of the more mouldable foam latex was used because the latter was too expensive.

The monster masks and costumes the band use are made of foam latex, with some other materials like canvas, metal and leather.

She spent three days in the terminal, sleeping on a foam mat.

It's got the lot: a four-berth, fully waterproof tent, one double and two single sleeping bags, a double airbed and two foam mats.

We are lying face down on a pair of foam mats, a gushing flow of water brushing our noses, at the summit of a pink castle.

Foam mats can be notoriously uncomfortable, so investing in a lightweight self-inflating mattress can make all the difference to a night spent under the canvas.

They soon found themselves surrounded by sound proof foam mats, extended boom of mics and a mixing board.

Its generous foam padding will help push you up a cup size.

The earcups, with vinylcovered foam padding, are comfortable, thanks to the loose fit of the headband.

Foam padding helps to stop them rattling.

Some have foam padding on the heel to make descents and rappels more comfortable.

It has foam padding around the top of the fence and between each of the six sections.

I can't sleep without my foam pillow.

I began my own family life and the family began demanding a foam pillow like mine because it was so comfortable.

Foam pillows (such as memory pillows), designed to cradle the head, can make you feel quite sweaty.

Haven't they heard of a foam roller?

I'm doing tummy exercises at least twice a day, lying my lower back over a foam roller and doing four sets of 15 very slow, controlled sit-ups.

A stiff back can be the culprit so it's worth investing in a foam roller to loosen you up before and after rides.

Apply the paint with a small foam roller for the best finish.

The foam roller originated as a humble tool for aiding injured runners.

Have you had the top of your head sawn off and polystyrene foam pumped into the cavity?

One clip captures the moment he flew through a polystyrene foam target measuring 30cm by 30cm held 1.5 metres above the ground, setting another world record in the process.

Molded green polystyrene foam trees along with vacuformed shrubs and vines also provided some crude landscaping.

Behind these tubes are bundles of closed-cell polystyrene foam, placed between the barrier and wall.

Any other flame retardant would likely need higher load levels in the polystyrene foam.

The two are then mixed together with a tool similar to a diner’s milkshake blender to create the polyurethane foam that forms the hats.

The band's pyrotechnics had ignited the polyurethane foam that was used for acoustic purposes.

These were then prised out with a forklift, covered in protective layers of epoxy resin, polyurethane foam and wood, and loaded into two container units for transport.

They then wrapped it in clingfilm, constructed a box from plywood to contain it and mixed two chemicals together to create polyurethane foam, sealing all the gaps.

The hull was constructed from polyurethane foam and covered with fiberglass, and the wing panels were fiberglass throughout.